Driwall™ Membrane Adhesive is a fast-drying, solvent-release adhesive that needs very little mixing before use. It is formulated for all Keene Driwall™ Membrane products and also works with most asphalt-based waterproofing membranes.

• Coverage: about 450 sq ft per gallon at 1 mil

• VOC: 2.1 lb/gal (250 g/L)

• Viscosity: 1,250 cps; density 7.75 lb/gal; 33% solids

Click here for the data sheet.

KeeneSeal™ 100 is a one-part, fast-grab, multipurpose hybrid (silyl-terminated polyether) elastomeric sealant. Once cured it bonds without stress to Driwall™ Membrane, PVC, concrete, masonry, painted surfaces, plywood, OSB, metal and other common substrates, and it is formulated for all-weather performance.

• Meets ASTM C920 Type S, Grade NS, Class 25, Use NT, A, M

• VOC compliant; no solvents or isocyanates

• Flexible and durable; will not shrink or crack; fast cure

• White cartridge, limestone cartridge (24 per case) or limestone sausage (16 per case)

Click here for the data sheet.

Driwall™ Drainable Housewrap combines a breathable weather-resistive barrier with a built-in 1.5 mm drainage plane, so a single layer keeps bulk water out, drains it away and still lets the wall dry. Made in the USA.

• Structured-strand drainage plane moves water out in multiple directions

• Vapor-permeable, so moisture inside the wall can escape

• Integrated seam tape for faster installation

• Partially see-through, so you can line up with chalk-lined studs

• Lightweight and flexible; works with all cladding types

Click here for the data sheet.

KeeneSeal™ 300 is a one-part, low-VOC hybrid polymer sealant for exterior penetrations and flashing details. It cures with moisture into a durable, UV-stable, weather-resistant seal and will not sag on vertical or overhead joints.

• Free of solvents and isocyanates; low odor; minimal shrinkage

• Service temperature -40°F to 200°F

• Bonds to housewrap, windows and doors, plywood, OSB, concrete, masonry, metal and exterior gypsum

• White; 10.3 fl oz cartridge (24 per case) or 20 fl oz sausage (16 per case)

Click here for the data sheet.

ViperVent® CDR is a combined drainage and ventilation mat for roofs and siding. Installed under the roofing or cladding, its polymer core keeps a gap open so moisture drains out and air can move, helping prevent mold, mildew and rot.

• 50 ft roll (part # 01-X-0007)

• For cedar shingles and shakes, metal and standing-seam, zinc, asphalt and fiberglass shingles, SIP roofs and siding

• Lightweight; installs with a staple hammer

• Wide rolls mean fewer seams

• Core does not absorb moisture and resists most corrosive chemicals and solvents

• 25-year limited warranty

Click here for the data sheet.

Driwall™ Rainscreen is an entangled-mesh drainage mat that holds a continuous gap open behind stucco, thin stone, brick, siding and other cladding. Water drains out of the gap and air moves through it, which helps prevent mold, rot and moisture damage in the wall. Every size meets ASTM E2273 drainage requirements and passes NFPA 285.

• 013-1: 0.13 in (3.8 mm), 100 ft roll, 400 sq ft. For stucco, thin stone or brick, manufactured stone, stone and brick masonry, and lap siding

• 020-1: 0.25 in (6 mm), 25 ft or 65 ft roll (260 sq ft). For stucco, thin stone or brick, manufactured stone, stone and brick masonry, and lap siding

• 10MM: 0.40 in (10.9 mm), 45 ft roll, 180 sq ft. For stucco, thin stone or brick, manufactured stone, stone and brick masonry, fiber cement and wood siding. Meets the Canadian 10 mm rainscreen requirement

• 075-1: 0.75 in (18 mm), 50 ft roll, 200 sq ft. For stone and masonry

• UV: 0.40 in (10.2 mm) or 0.25 in (6.3 mm), 45 ft roll, 180 sq ft. Long-term UV resistance for fiber cement and wood siding, open-joint cladding, metal panels and composite cladding

013-1 Data Sheet

020-1 Data Sheet

075-1 Data Sheet

10MM Data Sheet

UV Data Sheet

Keene root barrier is a polymeric sheet that stops root penetration and redirects roots into a horizontal growth plane, protecting the waterproofing membrane below green roofs and planters and helping lock in vegetation against wind uplift.

• Roll size: 53" x 175' (773 sq ft)

• Turn up at least 4" above finish grade at perimeters and penetrations

• Service temperature -70°F to 180°F

• Sold by the roll

Options

• RB-20 – 20 mil; lap seams 6" min. – 76 lb/roll

• RB-30 – 30 mil; lap seams 12" min., tape with KeeneFlash 300 – approx. 114 lb/roll

Advised to purchase Keene Flash Tape with the Root Barrier.

Technical data sheets: RB-20 | RB-30